Filter Sort
close

H&S Manufacturing, MK Martin Enterprise Inc., California, Nevada - Hay and Forage

19 items
1 - 19 of 19
ACTION V HAY RAKES

ACTION V HAY RAKES

HSManufa-ACTION V HAY RAKES

The 2200 and 3200 series Action Rakes backbone and wing design allows the uniform release of crop when raised for a finished windrow. For complete specifications and pricing, view the PDF.
View Details
BALE WRAPPER

BALE WRAPPER

HSManufa-BALE WRAPPER

The Automatic operating mode allows the H&S Linewrap to be a one man operation. The machine wraps while the operator loads. An optional remote control is available for side loading. The Linewrap’s independent power source is a 13 horse power gas engine with electric start. An 18 amp alternator powers the hydraulic system which controls all machine functions. The self contained hydraulic system utilizes a large capacity oil reservoir for cooler operation.
View Details
DISC MOWER IMPLEMENT CADDY

DISC MOWER IMPLEMENT CADDY

MKMartinE-DISC MOWER IMPLEMENT CADDY

The MK Disc Mower Implement Caddy transforms your 3PH disc mower into a pull type unit to help reduce wear on the mower while reducing stress from your tractor. Using the adjustable top link, you can connect your disc mower faster and easier than before, and with the addition of the adjustable you can level your caddy and mower for an even cut as you drive along. The MK Disc Mower Implement Caddy comes in two models: inline (C1201) and offset (C1200).
View Details
FORAGE BOXES

FORAGE BOXES

HSManufa-FORAGE BOXES

The 5200 Series Extra Capacity 7+4 Front Unload Forage Box features 7' 4" Inside Width, Aluminized Box Sides & Rear, Removable Roof, 2.5" x 2.5" Tubular Uprights, 10" 8-Gauge Channel Main Stringers at 42" Spacing, 5" 6-Gauge Steel Channel Cross-Frame Members, 2" Main Apron Shaft. For further specifications, models and pricing, see the PDF.
View Details
GRINDER-MIXER

GRINDER-MIXER

HSManufa-GRINDER-MIXER

167 Cu. Ft./135 Bushel Capacity. 14" Mixing Auger w/Self-Aligning 30" Base. Independent Mixer Drive. 21" Mill w/66 Hammers. 8-Section Banded Main Drive Belt. (2) 3" x 17" Hopper Magnets. 540 RPM PTO. Shear Bolt Protection on the Mixing Auger & Transfer Auger Drive. Self-Contained Hydraulic System w/15-Gallon Reservoir & Filter.
View Details
HEAVY DUTY WHEEL RAKES

HEAVY DUTY WHEEL RAKES

HSManufa-HEAVY DUTY WHEEL RAKES

H&S Manufacturing HD II Rake allows you to choose from 4 different wheel sizes: 17, 18, 19, or 20. It also features adjustable window width. The windrow width can be adjusted hydraulically to a maximum of 72". One hydraulic remote, along with the electrical control box, controls all the functions of the rake.
View Details
HI-CAPACITY 5100 BI-FOLD RAKES

HI-CAPACITY 5100 BI-FOLD RAKES

HSManufa-HI-CAPACITY 5100 BI-FOLD RAKES

A large diameter rake wheel hub is used for added strength to the rake wheel dish. Independent rake wheel suspension allows the rake wheels to follow the contour of the ground and low maintenance “bee Hive” style springs support the large 60" rake wheels. The rake arms feature 2 on each end of the arm smooth operation and less rakes with bushings. Read more specifications and pricing details by viewing the PDF.
View Details
HI-CAPACITY 7100 HD RAKES

HI-CAPACITY 7100 HD RAKES

HSManufa-HI-CAPACITY 7100 HD RAKES

Available in 16 and 18 wheel models. 60” Rake Wheels w/18 Sets of Rubber Mounted Teeth (HDII style) for handling tougher crops such as corn stalks, or high tonnage forage. An Optional 3-wheelCenter Kicker is available.
View Details
HI-CAPACITY BI-FOLD WHEEL RAKES

HI-CAPACITY BI-FOLD WHEEL RAKES

HSManufa-HI-CAPACITY BI-FOLD WHEEL RAKES

The hi-Capacity rake opens and closes hydraulically, rake wheels are lowered and raised hydraulically, and the rake wheels float independently. A 2 or 3 wheel center kicker assembly is optional for the Hi-Capacity rakes. The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the 12, 14 wheel Hi-Capacity rakes to fit varying conditions. Learn more by viewing the PDF.
View Details
HI-CAPACITY FLEX-FRAME RAKES

HI-CAPACITY FLEX-FRAME RAKES

HSManufa-HI-CAPACITY FLEX-FRAME RAKES

Introducing the latest addition to the Flex-Frame Family of Rakes: the NEW H&S 6116 FLEX-FRAME Rake, joining the 18 and 20 wheel models!
View Details
HIGH DUMP BOX

HIGH DUMP BOX

HSManufa-HIGH DUMP BOX

The Hi-Dump Box features: Combination 10 and 12 gauge steel tub construction. Heavy gusseted and reinforced box style frame. GVWR rating of approximately 45,000 lbs., and an empty box weight of around 15,000 lbs., the 9215 is capable of lifting and dumping approximately 30,000 lbs of product to meet the GVWR capacity. The variable dumping height gives you more versatility at harvest time. ENTIRE dumping cycle should take approximately two minutes depending on hydraulic supply output. The master/slave hydraulic system automatically rephases at the end of each cylinder stroke and has the flexibility to top off a truckload with a partial dump – not restricted to a full dump cycle. Right hand dump has a 47 degree dumping angle. (2) 27” x 16” Sight windows and (2) tub access panels. Standard highway lighting. Adjustable height single clevis swivel hitch. Telescoping/adjustable length hitch pole. Rear Tow Bar.
View Details
LH BALE PROCESSOR

LH BALE PROCESSOR

HSManufa-LH BALE PROCESSOR

The LH Discharge 3957 from H&S has an overall length of 193" and a width of 136". It comes with a standard heavy duty hitch jack and a standard adjustable hitch with heavy duty clevis. For more specifications and pricing, view the PDF.
View Details
RH BALE PROCESSOR

RH BALE PROCESSOR

HSManufa-RH BALE PROCESSOR

The LH Discharge 3958 from H&S has an overall length of 193" and a width of 136". It comes with a standard heavy duty hitch jack and a standard adjustable hitch with heavy duty clevis. For more specifications and pricing, view the PDF.
View Details
ROLLER MIXER

ROLLER MIXER

HSManufa-ROLLER MIXER

167 Cu. Ft./135 Bushel Capacity. 14" Mixing Auger w/Self-Aligning 30" Base. Independent Mixer Drive. 18" x 16" Diameter Chill Cast Rolls w/6 GPI (Grooves per Inch) are Standard (4, 5, 8, 10, 12 or 15 GPI Rolls can be special ordered). Quick Change Worm Drive Roll Adjustment. Leaf Spring Roll Protection. Top Hopper w/Grate Magnet. 540 RPM PTO. View the PDF for complete specifications and pricing.
View Details
ROTARY RAKES

ROTARY RAKES

HSManufa-ROTARY RAKES

A constant velocity P.T.O. with slip clutch lets the operator make even, uniform windows even in tight corners. Adjustable front cylinder allows users to fine tune pitch the rake.
View Details
ROTARY TEDDERS

ROTARY TEDDERS

HSManufa-ROTARY TEDDERS

The RTG2 Rotary Tedder from H&S features 5.600-6 Wheels, 12 flexible steel teeth, Cardan shaft with slip clutch, an oil bath gear boxrna working width of 10' 2", and a transport width = 8' 2". For more models, specifications, and pricing, view the PDF.
View Details
STALK BREAKER

STALK BREAKER

HSManufa-STALK BREAKER

Interrupt/knock down/break up corn stalks while minimizing baler tooth breakage to protect your cattle feed. The INTERRUPTOR 8000 can berninstalled on the HC7116 Rake.
View Details
TRAILER IN-LINE RAKES

TRAILER IN-LINE RAKES

HSManufa-TRAILER IN-LINE RAKES

There are 3 models of the TR9 Rakes from H&S Manufacturing. All of which come equipped with 9, 5" diameter wheels, 40 tines per wheel and a 7mm rake wheel tine diameter. For further specifications and pricing, see the PDF.
View Details
TWIN-FLEX-MERGER

TWIN-FLEX-MERGER

HSManufa-TWIN-FLEX-MERGER

The ability (with up to 16’ windrow cuts) to merge (5) Windrows into one in either direction. No additional Cross-Conveyor Extension is needed! Patented Center Cam/Center DrivePatented Drive Design Provides Smooth Clump Free Windrows - NO BUNCHING!
View Details
1 - 19 of 19
1