Danuser | Garfield | Tube-Line Manufacturing Products

4-WHEEL DRIVE DOZER BLADES

TubeLine-4-WHEEL DRIVE DOZER BLADES

A Farmer's Best Friend, TubeLine's Pitbull Dozer Blades give operators the most advanced blade in the market, featuring our exclusive HUB design, the industry’s only parallel lift blade and hitchless undermount bracket. The HUB is Pitbull’s answer to completely eliminating a bulky and awkward lifting assembly permanently mounted to the nose of the tractor. The HUB’s slim design also provides impressive ground clearance at nearly factory specification. Take command and control on each pass, putting silage, dirt and snow exactly where you want it withrnPitbull’s available 8-way blade control, including parallel lift and forward pitch.

$0.00

View Details

BALE ACCUMULATORS

TubeLine-BALE ACCUMULATORS

The Tubeline Accumul8 gives producers time-savings for one of farmings biggest jobs. The Accumul8 is your solution for handling bales efficiently - saving you time and man power. You can now handle eight, ten or twelve bales at one time. This allows one person to quickly gather and load wagons or highway trailers. Keep your farm operating efficiently with the addition of the Tubeline Accumul8. The Accumul8's mechanical design requires no external hydraulics, PTO or electrical connections. Each bale triggers a series of switches, guiding the next bale into proper location and then releasing the entire pack when full.

$0.00

View Details

BALE GRABS

TubeLine-BALE GRABS

For increased efficiency Tubeline’s Grabber utilizes large curved tines to pick up bale packs for quick loading into storage and highway trailers. The Grabber is available in a variety of models to compliment Tubeline’s Accumul8 series. Grabbers are also available for other accumulators. For models, configurations, and pricing, view the PDF.

$0.00

View Details

Bale Wrapper

TL1000R

Hydraulically powered, the TL1700SR can easily switch between round and square bales by moving the secondary drive shaft on either of the appropriate stub shafts. Each stub shaft changes the drive ratio to provide the appropriate advancement of the bale. When the carrier arm is placed in the wrapping position, the carrier can be raised or lowered, centering the wrap on the bale to provide even plastic coverage throughout the wrapping process. The TL1700SR is also equipped with Tubeline's Twin Wrap Kit which laminates two layers together to form a stronger 2-ply layer of plastic. The Twin Wrap Kit is offset creating a 4" lead which ensures optimal overlap as the film is layered. For complete specifications and pricing on all of Tubeline's Bale Wrappers.

$0.00

View Details

BF8000 Self-Loading Bale Feeder

TubeLine-BF8000

The BF8000 SL is designed to handle round bales up to 6 feet in diameter and weighing up to 2,500 pounds. Equipped with a hydraulic loading arm and a two-prong bale spear, it can lift and place the bale onto the table. The loading arm can also carry a second bale to the field. Once the bale is on the table, an apron chain rotates it while the drum’s fingers unravel the hay. As the core of the bale is approached, the table can be tilted to increase contact between the bale and the drum, ensuring the entire bale is fed out. The BF8000SL features a hydraulic self-loading design, eliminating the need for additional equipment to load bales onto the BaleFeeder table. A mechanical loading arm position indicator helps you determine when the bale spears are ideally positioned for loading different sizes of bales or for transporting. The BaleFeeder’s drum uses retractable fingers to grab and fluff the bale on the table side while retracting back into the drum on the unloading side, preventing material from being pulled back onto the table. Other standard features include an apron chain conveyor and a table that can angle up to 22.5 degrees.

$0.00

View Details

EP HEAVY DUTY AUGER SERIES

Danuser-EP HEAVY DUTY AUGER SERIES

Heavy-duty performance at an exceptional price. Fully sealed planetary design increases longevity and reduces maintenance. Robust utility-style housing with integrated ears for added strength. Compact housing design with hoses securely routed out the top, allowing you to dig deeper and in tighter locations. Planetary check and fill plugs are accessible without removing the housing. Units range from 6-35 GPM with up to 3697 ft. lbs. of torque. 2” hex or 2-9/16” round output spindles available. 3-year warranty on drive unit.

$0.00

View Details

FORCED EJECTION SCRAPERS

Garfield-FORCED EJECTION SCRAPERS

When faced with substantial material-moving tasks, the Garfield Ejection Scraper is your go-to machine. Standard with hydraulically-operated rear gates utilizing forward-forced straight ejection, it ensures a smooth and even spread of material at the desired depth. The rear hinge design enables the bowl to rest on the ground during loading, reducing the horsepower needed compared to traditional front hinge scrapers. Optional Laser/GPS mounts and tandem hitches are available for all models. Available in 4 sizes ranging from 5 to 13 cubic yards, the Garfield Ejection Scraper is designed to meet various capacity needs. The Garfield Ejection Scraper is the ultimate tool for site preparation, ditch creation, pond and dam construction, large-area leveling, filling, terrace formation, and waterway management.

$0.00

View Details

FRONT WHEEL ASSIST DOZER BLADES

TubeLine-FRONT WHEEL ASSIST DOZER BLADES

Continuing to provide farmers across North America with the ultimate material handling dozer blade, Pitbull now offers blades designed for front wheel assist tractors. These new models offer class-leading maneuverability with Pitbull’s 8-way blade control including forward pitch and parallel lift. The slim design of Pitbull’s hitchless undermount bracket means no bulky lift assembly and provides optimal ground clearance, allowing full use of your tractor when the blade is detached. Pitbull blades for front wheel assist tractors are available in models designed for 100–500HP category tractors.

$0.00

View Details

GRADER BLADES

Garfield-GRADER BLADES

When tackling significant tasks, you require the most rugged grader blade available. The Garfield Grader Blade, available in four widths ranging from 10' to 16', is engineered to meet this demand. Equipped with Hydraulic Rear Steer across all models, operators can effortlessly move the blade up to 4 feet to the left or right side of the tractor hydraulically from the tractor seat. This feature enables the Grader Blade to clean along feedlot fences, buildings, road edges, trees, and more, without the need to drive the tractor too close to nearby objects. Additionally, the standard rear steer offset empowers the Grader Blade to clean out irrigation and drainage ditches, even in wet conditions, while maintaining the tractor on drier ground, thus minimizing side draft. Standard fold-down sides on all models transform the grader into a box scraper, allowing for increased material carrying capacity. The Garfield Grader Blade is the ultimate tool for terracing, road maintenance, waterways management, ditch clearing, site preparation, and snow removal tasks.

$0.00

View Details

HAMMER CONCRETE BREAKER

Danuser-HAMMER CONCRETE BREAKER

The Danuser Hammer CB40 has a 40” drop hammer design that breaks up to 9” thick reinforced concrete. This low maintenance concrete breaker achieves a full stroke with every cycle, delivering 82,000 lb. of impact force. An innovative anti-dry fire feature improves the durability of the machine. This is a great product for the industrial or commercial jobsite. Ideal for the demolition of parking lots, foundations, flooring, sidewalks, curbs, and more!

$0.00

View Details

HAMMER POST DRIVER

Danuser-HAMMER POST DRIVER

No springs. No cylinder. No return line. Hydraulic grapple option allows one person to pick up, load, and drive posts. Tilt option available. Free fall weight design creates smooth operation with less shock back to the vehicle 3/5" steel plate protects the top of the post from Hammer weight damage. Maximum impact force achieved with every stroke. Top of post is contained preventing kickout. No setup required, it’s ready to go to work. 1-Year Warranty. This machine easily drives T-posts, tent stakes, pipe fence, sign posts, fence posts, guard rails, median dividers, and railroad ties. For complete specifications and pricing, view the PDF.

$0.00

View Details

Hay Conditioner

HC7500T/HC9500T

The Accelerator's easy operation conditions hay by simply running it through adjustable steel crimping rollers, up to 15 mph. This process cracks the hay stems without knocking off the leaves. Conditioning also fluffs the hay, allowing air to flow through the swath, for faster and more even drying from top to bottom. Speed up your operation with the Tubeline Accelerator producing better hay, faster drying time and bigger profits.

$0.00

View Details

HORNET POST DRIVER

Danuser-HORNET POST DRIVER

Jackhammer style power cell offers controlled high-speed driving performance. Hydraulic grapple option allows one person to pick up, load, and drive posts. Post Driver comes standard with a flow control valve. Our flow control valve allows us to run within a wider range of hydraulic requirements, including high flow machines, without accelerated wear on the breaker. A tool-less driving tool quick change which means no hammer and punch needed to change driving tools. Comes standard with a domed driving tool. Flat driving tools and flat railroad tie driving tools (T8-RR only) can also be purchased. No setup required, it’s ready to go to work. 1-Year Warranty. View the PDF for further specifications and pricing.

$0.00

View Details

INTIMIDATOR TREE & POST PULLER

Danuser-INTIMIDATOR TREE & POST PULLER

The Intimidator is ideal for eliminating trees, saplings, shrubs, bushes, and other obstructions on the job site or farm. The unmatched versatility of the Intimidator handles the toughest stumps, posts, rocks, fencerows, and land-clearing jobs. Selectively eliminate what you want. Maneuver into tight locations and next to buildings or fences with ease. Remove the complete tree or stump, roots and all. Remove larger trees, even with smaller skid-steers or tractors, using the replaceable excavator bucket teeth and vertical jaw saw teeth to dig and cut roots. Uniquely synchronized jaws, designed for less wear and tear on the vehicle, are actuated by a rear-mounted, fully-protected 3" diameter cylinder, allowing the operator to aggressively excavate objects without fear of damage to the cylinder. Tapered jaws allow for larger trees to be gripped near the back of the jaws, maximizing pulling force. The bidirectional side saw teeth on the 12200T model provide a more aggressive design that allows you to cut off trees flush to the ground. Maximum horsepower rating = 125 HP. Lower operating costs than a bulldozer and less work than a chainsaw. Intimidate your job with the Danuser Intimidator.

$0.00

View Details

MAC BUCKET

Danuser-MAC BUCKET

Transport, mix, and dispense concrete, wildlife feed, agricultural grains, gravel, asphalt, and more! With a 1/2 yard base capacity (13.5 cubic ft.), and a 3/4 yard extended capacity (20 cubic ft.), the MAC Bucket replaces the manual labor of moving and mixing materials and is perfect for tight conditions where larger equipment is not ideal. This mixing and conveying (MAC) bucket features a skid-steer quick attach mount on both sides of the bucket, which allows for discharge from both the left and right sides. It is designed with no discharge gate and with the ability to self-load from loose piles, making the MAC Bucket a true one-person operation. All buckets come standard with two (2) multi-linked chutes (24" long) and two (2) 7' long hoses with flush-faced couplers (ISO 16028). Choose from two (2) bucket configurations based on your job requirements: MAC Bucket with a rubber auger or MAC Bucket with a steel auger. See the table below to know which option is best for your needs.

$0.00

View Details

MEGA MIXER

Danuser-MEGA MIXER

The Danuser Mega Mixer can be mounted on via Telehandler, Pallet Forks or Skid-Steer Quick Attachments. The integrated cutting edges make scooping piles easier. This Mega Mixer features a convenient chute storage and the bearing-supported auger adds strength and reduces wear. For complete specifications and pricing, view the PDF.

$0.00

View Details

PALLET FORK & GRAPPLE

Danuser-PALLET FORK & GRAPPLE

Danuser is proud to introduce the Multi-Purpose Grapple as the newest accessory to the Danuser Pallet Fork line. Expand the functionality of your pallet forks to carry various items such as logs, rocks, pipe, brush, debris, hay bales, fence posts and more. Versatile working options permit the Multi-Purpose Grapple to be pinned in an upright position which allows for normal pallet fork use without the hassle of removing the grapple from the frame (no tools required). With a maximum opening of 55” and 9,500 lbs. of force, the grappling possibilities are endless. Includes hoses with flat faced couplers.

$0.00

View Details

PULL TYPE BOX SCRAPERS

Garfield-PULL TYPE BOX SCRAPERS

The Garfield Drag Scrapers excel in touch-up and limited land leveling tasks, making them ideal for short haul projects, smoothing, and small jobs where the expense of an Ejection Scraper may not be justified. Available in widths ranging from 8' to 14', the Garfield Drag Scraper offers a solution for every scraping need, ensuring versatility and efficiency. Rippers (scarifiers) are available for all standard drag scrapers, providing the capability for scarifying and loosening soil in preparation for leveling and planing. With the hydraulically operated ripper assembly, you can easily control the depth up to 6" from the bottom of the scraper, enhancing precision and control. Additionally, the Garfield Drag Scraper can be equipped with a tilt feature, enabling you to cut ditches or crown roads as needed. The Garfield Drag Scraper is the perfect tool for various applications, including road and driveway maintenance, site preparation, material extraction from buildings, snow removal, and land leveling.

$0.00

View Details

ROUND BALE FEEDERS

TubeLine-ROUND BALE FEEDERS

Round bales have significantly reduced the amount of work it takes to handle hay. However, feeding has still been a labour intensive job — until now. the Tubeline Bale Feeder takes the hassle out of feeding large round bales. Using the Bale Feeder can reduce spoilage caused by bales sitting outside in bulky inefficient stationary units.

$0.00

View Details

SILAGE RAKES

TubeLine-SILAGE RAKES

Pitbull Rakes are a versatile tool designed to move large amounts of material across a bunker silo with minimal disruption. The best of two approaches, the Pitbull Rake works like a dozer bladerncombined with the properties of a bucket allowing operators to not only push material but carry it as well. Like a dozer blade the Pitbull Rake can push and pile material into the bunker due to its large push plate. With the addition of solid tines across the bottom and bale spears on each side, the rake also functions like a bucket, able to carry high capacities of material up the bunker. This makes it ideal for filling low spots or piling material along the bunkers edge.

$0.00

View Details

SQUARE BALE FEEDERS

TubeLine-SQUARE BALE FEEDERS

The Boss 1 is a square bale processor that mounts on your skidsteer or tractor loader combining adaptability with accessibility. Now you can feed and bed in the tight spots that are nearly impossible to get to with a trail behind processor. From feeding to bedding, this hydraulically driven processor is ready to take charge. The unique loader-mount design means you can raise the Boss 1 above gates and pens giving you greater control of where the bale ends up. The versatility of a loader mounted unit makes operating it easier and more comfortable. Because the Boss 1 is upfront, loading bales is quick and simple, just Scoop N’ Go. The Boss 1 handles mid size square bales up to 8 feet long. By simply adjusting the distribution chute your Boss 1 is now ready to go from bedding straw, to fence-line feeding, to filling bunkers, to windrowing large bales for rebaling. For specifications and pricing on all of TubeLine's Square Bale Feeders, view the PDF.

$0.00

View Details

STUMP AUGERS

Danuser-STUMP AUGERS

The stump auger planes away stumps without requiring large, specialized equipment. A threaded pilot digs into the stump and large cutting blades then shave the stump away. The large cutting blades are reversible for more cutting life. Complete stump removal is achieved by overlapping planning locations.

$0.00

View Details

T3 DRIVER

Danuser-T3 DRIVER

The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3" O.D. (outside diameter) pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. We offer several mounting options, including an offset skid-steer quick attach which allows the operator to drive parallel to the fence line, a bolt-on/weld-on bracket that mounts to almost any flat surface, and a tilt bracket for up to 20° adjustments left or right. Use down pressure from the host vehicle to drive more posts in the ground faster. The T3 Driver includes one bolt-on/weld-on bracket, hoses and flat face ISO couplers for simple plug and play operation. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.

$0.00

View Details

TECHNOBALE BALE TRAILER

TubeLine-BALE TRAILER

The TechnoBale's fully adjustable arm is designed to give the bale a spin before picking it up, so you can follow the path of the baler without time-consuming and damaging cross-tracking. You can adjust everything from the arm to the bale guides on the TechnoBale to fit your preferred bale size, from 4x4 to 5x6, for safe and simple operation. The convenient hydraulics are designed to work with most tractors' available hydraulics requiring only two sets of auxiliary outlets, moving from the loading cycle to the unloading cycle with the flip of a switch.

$0.00

View Details

THREE POINT BOX SCRAPERS

Garfield-THREE POINT BOX SCRAPERS

The Garfield Corral Scraper stands out as the ideal solution for those challenging, hard-to-reach areas. Mounted on a 3-point hitch, this scraper offers superior maneuverability compared to pull-type scrapers, making it particularly effective for cleaning pens or buildings. With its robust construction and generous capacity, the Garfield Corral Scraper tackles larger jobs with ease, surpassing the capabilities of conventional 3-point box blades. Available in three widths ranging from 8' to 10', it provides options to suit various needs. The Garfield Corral Scraper serves as the ultimate tool for a wide range of applications, including road and driveway maintenance, site preparation, material extraction from buildings, snow removal, land leveling, and cleaning out buildings and pens.

$0.00

View Details

VERTICAL BEATER MANURE SPREADERS

TubeLine-VERTICAL BEATER MANURE SPREADERS

Consistent metering, consistent spread. Developed with features to ensure commercial readiness, NITRO commercial series spreaders offer slip slide poly board floors and walls, a guillotine endgate, reversible apron chain, and quick drop beaters The guillotine endgate can be held in any position controlling how much material is able to be moved to the beaters by the variable speed apron chain This method of delivery provides consistent metering whether working with pen pack or semi-solids with the recent addition of the tri-axle models, you get all these feature plus reduced compaction, easier turning and more. Responding to market demand, the NITRO Rancher Series was developed to ensure smaller operations get the same metering in a format tailored to them NITRO RS spreaders are ideal for farmers trying to keep their yards clean while delivering rich nutrients to the field. Removeable beater assemblies provide increased value and functionality, allowing the NITRO to operate as a rear discharge trailer with a live floor when not spreading

$0.00

View Details

WIRE WINDER

Danuser-WIRE WINDER

Danuser's Wire Winder can roll up to 3/4 mile barbed wire (12.5ga) or 6 miles smooth wire (14ga). 2” hex connection. Two tie-wire locations and 10 easy-start wire slots to roll multiple wires at one time.rnToolless operation. For further specifications and pricing, as well as details on the Wire Unroller, view the PDF.

$0.00

View Details