Filter Sort
close

Elston Manufacturing, Danuser, Worksaver, Washington - Land Management

25 items
1 - 25 of 25
3 PT. QUICK HITCHES

3 PT. QUICK HITCHES

Worksaver-3 PT. QUICK HITCHES

Worksaver® Quick Hitches are designed for fast, safe, and easy connection or disconnection of 3-point implements. Constructed from heavy steel bar and tubing, these quick hitches ensure years of trouble-free service in handling your equipment. Compatible with most Category I-III 3-point hitch tractors, Worksaver® Quick Hitches come completely assembled and ready to mount to your tractor, providing convenience and efficiency whenever you need it.
View Details
ATV ATTACHMENTS

ATV ATTACHMENTS

Worksaver-ATV ATTACHMENTS

Elevate your ATV’s productivity by converting to Worksaver ATV Attachments. Great for wildlife food plots, gardens and large acreage, Worksaver provides quality designed and innovative products that work the way you live!rnrnIntroducing the Flip-Over Culti-Packer, perfect for final compaction after seeding your food plot. It reduces air pockets, increases seed germination and helps prevent erosion. It's unique design allows for easy “flip-over” from transport to operation mode. This machine can also be used for breaking the crust of rain-hardened soil, to allow emerging seedlings to break through and grow. For complete specifications and pricing, view the PDF.
View Details
BOX SCRAPERS

BOX SCRAPERS

Worksaver-BOX SCRAPERS

If you need a box scraper to perform site preparation or restoration, or use for applicable farm practices, then our heavy duty box scrapers are what you need. They are ruggedly built with the features you need. The scarifier height can be adjusted to loosen the soil at a desired depth or raised out of the way. Each box scraper has a reversible cutting edge to scrape material into the box area. Built rugged for long dirt moving life. Cat. I (7/8" pins) Quick Hitch Compatible. Formed moldboard for superior strength and performance. Reversible 6" cutting edges resulting in greater durability. 3-position heat treated steel scarifier shanks are height adjustable. Ideal for leveling, finish grading, feedlots, outdoor arenas, back filling at building sites and so much more.
View Details
CEMENT MIXERS

CEMENT MIXERS

Worksaver-CEMENT MIXERS

Main Features All welded drum construction with internal paddles for uniform mixing and clean dumping. Compact, trouble free, long life design with few moving parts. Hydraulic motor drive for easy operation and low maintenance requirements. Five (5) cu./ft. capacity (1 bag mix). Perfect for fence posts, footings, sidewalls and hard to reach areas. Direct gearbox drive of drum. Welded main frame with “universal” skid steer mount allows easy access to the operators seat. Flow control valve allows easy control of speed of the mixer. All welded frame with store onboard parking stands for easy storage of the mixer when not in use.
View Details
EP HEAVY DUTY AUGER SERIES

EP HEAVY DUTY AUGER SERIES

Danuser-EP HEAVY DUTY AUGER SERIES

Heavy-duty performance at an exceptional price. Fully sealed planetary design increases longevity and reduces maintenance. Robust utility-style housing with integrated ears for added strength. Compact housing design with hoses securely routed out the top, allowing you to dig deeper and in tighter locations. Planetary check and fill plugs are accessible without removing the housing. Units range from 6-35 GPM with up to 3697 ft. lbs. of torque. 2” hex or 2-9/16” round output spindles available. 3-year warranty on drive unit.
View Details
GOPHER KILLER

GOPHER KILLER

ElstonMan-GOPHER KILLER

The Elston Manufacturing Gopher Getter GA-800 boasts a sturdier heavy-duty frame, featuring a hardened plastic bait box, a 22" spring-loaded coulter, and an adjustable tunnel depth. This innovative device works by constructing an artificial tunnel, into which the poison is dispensed. Gophers then encounter the bait within the tunnel, succumbing underground, beyond the reach of other animals. The tunnel depth can be easily tailored to match the gophers' digging depth in your area, ensuring optimal efficacy. Elston Gopher Getter bait applicators offer a safe, economical, and swift solution for controlling gopher populations. These devices expedite the treatment process compared to manual or alternative methods. Elston products dispense bait in precise quantities, ensuring effective elimination without unnecessary waste. The GA-800 efficiently applies approximately two pounds per acre of bait, with burrows spaced 20 feet apart across an average field. Optimal application occurs when gophers are active, particularly during periods of limited food availability, such as spring and fall. Summer applications may yield reduced control results. With a 22" coulter and weighing 705 lbs, the GA-800 is compatible with Category II, III, and IIIN Standard and Quick Hitch setups, ensuring versatility across various equipment configurations.
View Details
GRAPPLES

GRAPPLES

Worksaver-GRAPPLES

Worksaver grapples are heavy-duty agricultural and industrial attachments designed for skid steers, compact tractors, and other utility machines. These grapples feature powerful jaws with high-strength steel construction, allowing for efficient handling of a variety of materials, including logs, brush, debris, and more. Worksaver grapples come in various sizes and designs to fit different machines and tasks, with dual grapples for improved gripping and versatility. The grapples are built for durability and reliability, offering efficient performance in tasks such as land clearing, construction, and landscaping.
View Details
HAMMER POST DRIVER

HAMMER POST DRIVER

Danuser-HAMMER POST DRIVER

No springs. No cylinder. No return line. Hydraulic grapple option allows one person to pick up, load, and drive posts. Tilt option available. Free fall weight design creates smooth operation with less shock back to the vehicle 3/5" steel plate protects the top of the post from Hammer weight damage. Maximum impact force achieved with every stroke. Top of post is contained preventing kickout. No setup required, it’s ready to go to work. 1-Year Warranty. This machine easily drives T-posts, tent stakes, pipe fence, sign posts, fence posts, guard rails, median dividers, and railroad ties. For complete specifications and pricing, view the PDF.
View Details
HORNET POST DRIVER

HORNET POST DRIVER

Danuser-HORNET POST DRIVER

Jackhammer style power cell offers controlled high-speed driving performance. Hydraulic grapple option allows one person to pick up, load, and drive posts. Post Driver comes standard with a flow control valve. Our flow control valve allows us to run within a wider range of hydraulic requirements, including high flow machines, without accelerated wear on the breaker. A tool-less driving tool quick change which means no hammer and punch needed to change driving tools. Comes standard with a domed driving tool. Flat driving tools and flat railroad tie driving tools (T8-RR only) can also be purchased. No setup required, it’s ready to go to work. 1-Year Warranty. View the PDF for further specifications and pricing.
View Details
HYDRAULIC POST DRIVERS

HYDRAULIC POST DRIVERS

Worksaver-HYDRAULIC POST DRIVERS

Worksaver with over two decades of post driver innovations now offers two series of post drivers. Our standard duty model HPD-16 incorporates many of the innovations first brought to the market by Worksaver: “convertible” hydraulic valve, grease zerks at all major pivot locations, plated manual cranks, plastic slide blocks, adjustable legs, bubble level, and SplitCap™. The HPD-16 (32,000 lbs. of force) is ideal for the small property owner with limited fence posts to drive. Our patented Q-series of hydraulic drivers, HPD-22Q (80,000 lbs. of force) and HPD-26Q (110,000 lbs. of force) offer ingenious solutions to routine maintenance to keep the operator building fence. Q-series drivers feature two time savings QuickChange™ system. Worksaver’s SplitCap™ with enhanced cylinder rod design allows the operator to perform routine maintenance on the rod cap seal without removing the cylinder from the driver. Our Q-spring assembly reduces spring change over from hours to minutes. This design offers increased service life when compared to conventional post driver springs. The integrated spring/ spring-anchor design when mounted to the cushion mounts reduces vibration which further provides increased spring service life. Increasing fence-building performance, making the Q-series a game changer.
View Details
INTIMIDATOR TREE & POST PULLER

INTIMIDATOR TREE & POST PULLER

Danuser-INTIMIDATOR TREE & POST PULLER

The Intimidator is ideal for eliminating trees, saplings, shrubs, bushes, and other obstructions on the job site or farm. The unmatched versatility of the Intimidator handles the toughest stumps, posts, rocks, fencerows, and land-clearing jobs. Selectively eliminate what you want. Maneuver into tight locations and next to buildings or fences with ease. Remove the complete tree or stump, roots and all. Remove larger trees, even with smaller skid-steers or tractors, using the replaceable excavator bucket teeth and vertical jaw saw teeth to dig and cut roots. Uniquely synchronized jaws, designed for less wear and tear on the vehicle, are actuated by a rear-mounted, fully-protected 3" diameter cylinder, allowing the operator to aggressively excavate objects without fear of damage to the cylinder. Tapered jaws allow for larger trees to be gripped near the back of the jaws, maximizing pulling force. The bidirectional side saw teeth on the 12200T model provide a more aggressive design that allows you to cut off trees flush to the ground. Maximum horsepower rating = 125 HP. Lower operating costs than a bulldozer and less work than a chainsaw. Intimidate your job with the Danuser Intimidator.
View Details
LANDSCAPE RAKES

LANDSCAPE RAKES

Worksaver-LANDSCAPE RAKES

Three-point (3 pt.) Mounted Attachments for Handling Your Routine Maintenance with Ease.
View Details
MAC BUCKET

MAC BUCKET

Danuser-MAC BUCKET

Transport, mix, and dispense concrete, wildlife feed, agricultural grains, gravel, asphalt, and more! With a 1/2 yard base capacity (13.5 cubic ft.), and a 3/4 yard extended capacity (20 cubic ft.), the MAC Bucket replaces the manual labor of moving and mixing materials and is perfect for tight conditions where larger equipment is not ideal. This mixing and conveying (MAC) bucket features a skid-steer quick attach mount on both sides of the bucket, which allows for discharge from both the left and right sides. It is designed with no discharge gate and with the ability to self-load from loose piles, making the MAC Bucket a true one-person operation.  All buckets come standard with two (2) multi-linked chutes (24" long) and two (2) 7' long hoses with flush-faced couplers (ISO 16028).  Choose from two (2) bucket configurations based on your job requirements: MAC Bucket with a rubber auger or MAC Bucket with a steel auger. See the table below to know which option is best for your needs.
View Details
MEGA MIXER

MEGA MIXER

Danuser-MEGA MIXER

The Danuser Mega Mixer can be mounted on via Telehandler, Pallet Forks or Skid-Steer Quick Attachments. The integrated cutting edges make scooping piles easier. This Mega Mixer features a convenient chute storage and the bearing-supported auger adds strength and reduces wear. For complete specifications and pricing, view the PDF.
View Details
PALLET FORK & GRAPPLE

PALLET FORK & GRAPPLE

Danuser-PALLET FORK & GRAPPLE

Danuser is proud to introduce the Multi-Purpose Grapple as the newest accessory to the Danuser Pallet Fork line. Expand the functionality of your pallet forks to carry various items such as logs, rocks, pipe, brush, debris, hay bales, fence posts and more. Versatile working options permit the Multi-Purpose Grapple to be pinned in an upright position which allows for normal pallet fork use without the hassle of removing the grapple from the frame (no tools required). With a maximum opening of 55” and 9,500 lbs. of force, the grappling possibilities are endless. Includes hoses with flat faced couplers.
View Details
PALLET FORKS

PALLET FORKS

Worksaver-PALLET FORKS

Designed for skid steer or tractor front loaders, our standard pallet forks have rated capacities from 4,000 lbs. to 5,500 lbs. All models feature solid steel alloy forks for long life, with spring loaded latches for easy adjustment spacing. Skid steer pallet forks (4,000 lbs. or 5,500 lbs.) are offered with a one piece backstop or a step through design for easy cab access and excellent visibility. Skid steer models mount with the “Universal” quick-attach mounting system. Models available with 42", 48" or 60" long forks. Premium forks include spring loaded latches for easy adjustment spacing. Optional interfacing quick-attach brackets are available for the model PF-448 for most popular loader models. Machined rails allow ease of fork spacing adjustment.
View Details
POST HOLE AUGERS/DIGGERS

POST HOLE AUGERS/DIGGERS

Worksaver-POST HOLE AUGERS/DIGGERS

Our Post Hole Diggers Dig Deeper, Faster & Smarter Engineered to allow the operator to dig deeper, faster and smarter, Worksaver’s complete line of PTO powered diggers offer time saving convenience with outstanding reliability. Shear-bolt protected driveline is coupled to a rugged gearbox featuring tapered roller bearings and spring-loaded seals for extended service life. Large 2” output shaft has two-bolt auger connection for reliable power transfer. All job matched augers utilize fishtail center points with double flighting on the first turn for quick, positive digging action right from the start.
View Details
POWERED LANDSCAPE RAKES

POWERED LANDSCAPE RAKES

Worksaver-POWERED LANDSCAPE RAKES

Power rakes are the ideal tool for the landscape contractor, large property owner, rental yard, park & recreation department or turf management professional. They do it all, prep, smooth, set grade, level, till, remove rocks and create the perfect seedbed making this tool a game changer. Features Flip-up side shields are self-storing on the unit allowing ease of windrowing rocks or debris. Flip-up gauge wheels (height adjustable) allows accurate control of working depth keeping machine level for smoother surface finish. Easily flip up out of the way for transport on a trailer. Replaceable bearing housings and triple seal bearings keep dirt out, providing more uptime. Choice of rotors - 2" Sabre tooth or 1-3/4" Carbide Tooth. Operator friendly chain case reduces maintenance as there is a minimal retained oil to contend with.
View Details
REAR BLADES

REAR BLADES

Worksaver-REAR BLADES

Three-point (3 pt.) Mounted Attachments for Handling Your Routine Maintenance with Ease.
View Details
ROTARY BROOMS

ROTARY BROOMS

Worksaver-ROTARY BROOMS

Rotary Brooms For Skid Steers, 3-Pt. & Front Loader Tractor Mount Features on All Models Designed for use by contractors, municipalities, institutions, and farmers. Hydraulically driven models for skid steer and front loaders, PTO driven models for 3-pt. tractor mounts (Cat. I). 32 inch diameter convoluted brushes available in Poly (P) or both Poly and Wire (PW). All models available in 5-ft., 6-ft. and 7-ft. widths. Remove dirt, sand, gravel and trash from construction entrances, parking lots, bridges, driveways and sidewalks. Remove thatch and prepare turf for the growing season. Clean snow or leaves from streets, driveways, and building entrances. Excellent for general clean up before sealing or repairing pavement. Broom angles up to 30° right or left. Optional manual or hydraulic angle adjustment kits available. Height adjustment chains maintain an even operating position. Parking stands included as standard equipment.
View Details
SPREADERS

SPREADERS

Worksaver-SPREADERS

Worksaver seeder/spreader models CS-694 and CS-1094 are built for the farmer who requires a quality, economical broadcast seeder/spreader. They easily handle all grass seed, wheat, oats, and fertilizers producing a uniform spread pattern. These models offer three spread patterns: left side only, right side only, or full 180° spread by simply moving a lever. Cone shaped hopper provides easy material flow. The CS-694 and CS-1094 cone seeders feature spun metal hoppers for improved material flow and easy clean-up. An optional wheel type agitator is available for Ag-lime to help reduce its clumping while improving its spread ability.    Choice of large hopper capacity Easy shift lever for directional spread Adjustable spinner fans for aggressive or passive spread Strong tubular steel main frame Heavy duty gearbox Fits large Cat. I hitches Optional rotating rod and wheel agitator
View Details
STUMP AUGERS

STUMP AUGERS

Danuser-STUMP AUGERS

The stump auger planes away stumps without requiring large, specialized equipment. A threaded pilot digs into the stump and large cutting blades then shave the stump away. The large cutting blades are reversible for more cutting life. Complete stump removal is achieved by overlapping planning locations.
View Details
STUMP GRINDERS

STUMP GRINDERS

Worksaver-STUMP GRINDERS

SmoothCut™ PTO Powered Stump Grinders Economical and Efficient PTO powered stump grinders make stump removal fast and easy. Operator easily controls the stump grinder from the comfort of the tractor seat. Features Maneuverable - goes anywhere a tractor can; gets into tight places. Increased productivity via it's unique cutting wheel design. Cutting wheel design provides a smoother cutting action. Easy to operate - hydraulic controls allow easy operation from the tractor seat using existing tractor hydraulic controls. Durable carbide-tipped cutting teeth are economical and easy to replace. Harden bushings used in major pivot points for increased reliability. Grease zerks provided at major pivot points for extended service life. SureFoot stabilizer bar provides secure footing during operation. Rubber deflector helps control chips and debris during grinding. Parking stand for easy storage. Two pair of remote hydraulic outlets are required on the tractor to operate the stump grinder. SG-26 designed for tractors 22 -50 PTO HP; SG-36 designed for tractors 45-100 PTO HP. Standard pressure relief valve for even control of cutting feed rate.
View Details
T3 DRIVER

T3 DRIVER

Danuser-T3 DRIVER

The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3" O.D. (outside diameter) pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. We offer several mounting options, including an offset skid-steer quick attach which allows the operator to drive parallel to the fence line, a bolt-on/weld-on bracket that mounts to almost any flat surface, and a tilt bracket for up to 20° adjustments left or right. Use down pressure from the host vehicle to drive more posts in the ground faster. The T3 Driver includes one bolt-on/weld-on bracket, hoses and flat face ISO couplers for simple plug and play operation. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.
View Details
WIRE WINDER

WIRE WINDER

Danuser-WIRE WINDER

Danuser's Wire Winder can roll up to 3/4 mile barbed wire (12.5ga) or 6 miles smooth wire (14ga). 2” hex connection. Two tie-wire locations and 10 easy-start wire slots to roll multiple wires at one time.rnToolless operation. For further specifications and pricing, as well as details on the Wire Unroller, view the PDF.
View Details
1 - 25 of 25
1