close
Filter By
Brand
Worksaver, Tube-Line Manufacturing - Bale Handling Equipment
8 items
BALE ACCUMULATORS
TubeLine-BALE ACCUMULATORS
The Tubeline Accumul8 gives producers time-savings for one of farmings biggest jobs. The Accumul8 is your solution for handling bales efficiently - saving you time and man power. You can now handle eight, ten or twelve bales at one time. This allows one person to quickly gather and load wagons or highway trailers. Keep your farm operating efficiently with the addition of the Tubeline Accumul8. The Accumul8's mechanical design requires no external hydraulics, PTO or electrical connections. Each bale triggers a series of switches, guiding the next bale into proper location and then releasing the entire pack when full.
- USD
BALE GRABS
TubeLine-BALE GRABS
For increased efficiency Tubeline’s Grabber utilizes large curved tines to pick up bale packs for quick loading into storage and highway trailers. The Grabber is available in a variety of models to compliment Tubeline’s Accumul8 series. Grabbers are also available for other accumulators. For models, configurations, and pricing, view the PDF.
- USD
BALE GRABS/SPEARS/UNROLLER
Worksaver-BALE GRABS/SPEARS/UNROLLER
Designed as an efficient hay management tool for moving and feeding round bales, the RW Spin Off hydraulically rotates the bale, unwinding the hay into a windrow. Rotates in both directions for easy feeding and allows the operator to unroll what the cattle will clean up, eliminating wasted hay. Also, by changing the feeding location each day the operator can eliminate manure buildup. Available in three models and designed to fit Category II or Category III 3-pt hitches (FSO-906), front loaders (FLSO-907) and skid steers (SSSO908). All models are hydraulically driven for better operator control, provide easy operation from the cab of tractors or skid steers and feature a forged tapered spear for easier bale penetration. All have usable spear length of 53”. Eliminate wasted hay; only unroll what cattle will clean up in an hour. Almost no manure buildup; by feeding in a different location each day. Easy operation from the cab of the tractor or Skid Steer. Models for 3-pt, Front Loaders & Skid Steers. Hydraulically driven for better operator control. Rotates in both directions for easy feeding. Cushion valve in the motor provides protection for hydraulic components. Forged tapered spear for easier spear penetration.
- USD
BF8000 Self-Loading Bale Feeder
TubeLine-BF8000
The BF8000 SL is designed to handle round bales up to 6 feet in diameter and weighing up to 2,500 pounds. Equipped with a hydraulic loading arm and a two-prong bale spear, it can lift and place the bale onto the table. The loading arm can also carry a second bale to the field. Once the bale is on the table, an apron chain rotates it while the drum’s fingers unravel the hay. As the core of the bale is approached, the table can be tilted to increase contact between the bale and the drum, ensuring the entire bale is fed out. The BF8000SL features a hydraulic self-loading design, eliminating the need for additional equipment to load bales onto the BaleFeeder table. A mechanical loading arm position indicator helps you determine when the bale spears are ideally positioned for loading different sizes of bales or for transporting. The BaleFeeder’s drum uses retractable fingers to grab and fluff the bale on the table side while retracting back into the drum on the unloading side, preventing material from being pulled back onto the table. Other standard features include an apron chain conveyor and a table that can angle up to 22.5 degrees.
- USD
ROUND BALE FEEDERS
TubeLine-ROUND BALE FEEDERS
Round bales have significantly reduced the amount of work it takes to handle hay. However, feeding has still been a labour intensive job — until now. the Tubeline Bale Feeder takes the hassle out of feeding large round bales. Using the Bale Feeder can reduce spoilage caused by bales sitting outside in bulky inefficient stationary units.
- USD
ROUND BALE FEEDERS
Worksaver-ROUND BALE FEEDERS
Ideal for unrolling large round bales for feeding. Conserves hay – by unrolling only what cattle will eat in one hour. Easy operation from the tractor seat. Allows easy feeding relocation, which reduces manure buildup and spreads seeds. The HHU-2045 fits Cat. I/II hitches, as well as Cat. I or II Quick Hitch.
- USD
SQUARE BALE FEEDERS
TubeLine-SQUARE BALE FEEDERS
The Boss 1 is a square bale processor that mounts on your skidsteer or tractor loader combining adaptability with accessibility. Now you can feed and bed in the tight spots that are nearly impossible to get to with a trail behind processor. From feeding to bedding, this hydraulically driven processor is ready to take charge. The unique loader-mount design means you can raise the Boss 1 above gates and pens giving you greater control of where the bale ends up. The versatility of a loader mounted unit makes operating it easier and more comfortable. Because the Boss 1 is upfront, loading bales is quick and simple, just Scoop N’ Go. The Boss 1 handles mid size square bales up to 8 feet long. By simply adjusting the distribution chute your Boss 1 is now ready to go from bedding straw, to fence-line feeding, to filling bunkers, to windrowing large bales for rebaling. For specifications and pricing on all of TubeLine's Square Bale Feeders, view the PDF.
- USD
TECHNOBALE BALE TRAILER
TubeLine-BALE TRAILER
The TechnoBale's fully adjustable arm is designed to give the bale a spin before picking it up, so you can follow the path of the baler without time-consuming and damaging cross-tracking. You can adjust everything from the arm to the bale guides on the TechnoBale to fit your preferred bale size, from 4x4 to 5x6, for safe and simple operation. The convenient hydraulics are designed to work with most tractors' available hydraulics requiring only two sets of auxiliary outlets, moving from the loading cycle to the unloading cycle with the flip of a switch.
- USD
1 - 8 of 8
1
Efficient, durable and operator-friendly — General Implement’s Bale Handling Equipment line-up delivers a full suite of tools to streamline every stage of bale management. From hydraulically driven bale spears that rotate both ways and mount to 3-point hitches, front loaders or skid steers to versatile solutions like bale loaders, Teagle bale processors, bale forks, accumulators and moving arms, these tools cover heavy-duty feeding, stacking, unrolling and distribution tasks. Backed by trusted brands like HLA, Legend Attachments, Tube-Line Manufacturing, Worksaver and more, each attachment is engineered to save time, reduce waste and elevate productivity across hay and forage operations. Request a quote today.